Signs to investigate
- The vehicle pulls to one side
- The steering wheel is off-centre
- Uneven or rapid tyre wear
- Alignment is recommended after suspension or steering work
A wheel alignment adjusts measurable angles; it cannot correct worn or bent parts. The workshop should inspect the tyres, steering and suspension before adjustment.
Calculate for my car → Free to use. No account needed.Published by David Burridge, ShiftyMechanics founder and editor. Source checked . Guide content updated . How estimates work.
2021 Ford Ranger · Australia
From $99 Two- or four-wheel alignment; GST included
Tyre pressures, obvious tyre damage and steering or suspension looseness are checked before measurement, because worn parts can make an alignment inaccurate or short-lived.
Sensors are mounted and the vehicle is measured on a level alignment rack. Adjustable toe, camber or caster angles are corrected within the vehicle's available adjustment range.
The steering wheel is centred, fasteners are secured, and a before-and-after report and road test are normally used to verify the result.
A symptom alone does not prove a part has failed. Before authorising work, ask what inspection or test led to the recommendation.
Compare like with like. A lower quote may simply cover less of the job.
These items are not automatically required, but they can change the bill when inspection shows they are needed.
Confirm the branch quote and adjustable angles for the actual vehicle. The supplier says larger 4WD/SUV setups may cost more. Suspension repairs, tyre replacement, rotation and balancing are separate; no size multiplier has been applied. Tax and fees: GST included under service terms. Source checked 16 October 2026: https://www.mycar.com.au/tyres/wheel-alignment
Yes. Most jobs show modelled parts, labour and rates separately. Published supplied-and-fitted examples include installation in the advertised price. They do not provide a separate parts/labour breakdown; confirm tax, fees and fitment with the supplier.
A useful written quote should identify the repair scope, the main parts being supplied, the expected labour and any likely additional work. For this job, common inclusions are four-wheel measurement, adjustment of standard accessible angles, steering-wheel centring.
Choose your car and repair to review available price references, their scope and any remaining model assumptions.
Check the estimate