Signs to investigate
- Squealing or grinding when braking
- A brake warning light
- Longer stopping distance
- Vibration through the pedal
Repair cost guidesAUSTRALIAN REPAIR COST GUIDE
Brake Pad Replacement Cost in Australia
Brake pad prices vary by vehicle size, pad quality and whether the rotors also need attention. Start with a vehicle-profile estimate before approving the work.
Calculate for my car → Free to use. No account needed.Published by David Burridge, ShiftyMechanics founder and editor. Source checked . Guide content updated . How estimates work.
Published service-price examples · Fyshwick workshop, Canberra
Brake Pad Replacement
2021 Mazda CX-5 · Australia
From $149 Pads supplied and fitted, one axle
Pads supplied and fitted, one axleSee advertised options above
Work includedIncluded in total
Canberra Tyres & Mechanical: advertised service and conditions
Canberra Tyres' starting offer is per axle at its Fyshwick workshop. Vehicle and component grade affect the quote, which requires inspection. A separate fluid flush, sensor faults and other repairs are excluded. Confirm GST and final scope. This is an indicative supplier offer, not an Australian price ceiling. Tax and fees: GST not stated on source page; confirm with supplier. Replace brake pads on one axle Confirm the repair scope and exact vehicle specification.What changes the price?
- Front, rear or both axles
- Standard, ceramic or performance pads
- Vehicle size and brake design
- Whether rotors, sensors or callipers also need work
Questions to ask the workshop
- Is the quote for one axle or all four wheels?
- What brand and grade of pads are included?
- Do the rotors need replacement, machining or neither?
- Can I receive an itemised written quote before work starts?
Understand the repair scope
The workshop removes the wheels, checks pad thickness and inspects the rotors, calliper slides, dust boots and visible brake hoses on the affected axle.
New pads are fitted as an axle set, contact points are cleaned and lubricated with brake-compatible products, and the calliper pistons are carefully retracted.
The brakes are reassembled, the pedal is restored before moving the vehicle, and a controlled road test is normally used to confirm operation and begin bedding the pads.
Checks that should support the diagnosis
A symptom alone does not prove a part has failed. Before authorising work, ask what inspection or test led to the recommendation.
- Measure inner and outer pad thickness at each wheel
- Compare rotor thickness and run-out with the manufacturer's limits
- Check calliper slides and pistons for binding or leakage
- Confirm any warning light or noise is actually brake-related
What a comparable quote normally includes
Compare like with like. A lower quote may simply cover less of the job.
- Brake pads for one axle
- Wheel removal and refitting
- Basic rotor and calliper inspection
- Short post-repair road test
Possible extra work
These items are not automatically required, but they can change the bill when inspection shows they are needed.
- Rotor machining or replacement
- Wear sensors or fitting hardware
- Calliper, hose or slide repairs
- Brake-fluid renewal if due or contaminated
Understand the quote before agreeing
How much does brake pad replacement cost in Australia?
Canberra Tyres' starting offer is per axle at its Fyshwick workshop. Vehicle and component grade affect the quote, which requires inspection. A separate fluid flush, sensor faults and other repairs are excluded. Confirm GST and final scope. This is an indicative supplier offer, not an Australian price ceiling. Tax and fees: GST not stated on source page; confirm with supplier. Source checked 16 October 2026: https://canberratyres.com.au/services/brake-service
Does the estimate include parts and labour?
Yes. Most jobs show modelled parts, labour and rates separately. Published supplied-and-fitted examples include installation in the advertised price. They do not provide a separate parts/labour breakdown; confirm tax, fees and fitment with the supplier.
What should a brake pads quote explain?
A useful written quote should identify the repair scope, the main parts being supplied, the expected labour and any likely additional work. For this job, common inclusions are brake pads for one axle, wheel removal and refitting, basic rotor and calliper inspection.
Have a quote in front of you?
Choose your car and repair to review available price references, their scope and any remaining model assumptions.
Check the estimate