Signs to investigate
- Air from the vents is no longer cold
- Cooling fades after a recent regas
- The compressor cycles rapidly or will not engage
- Oily residue around an air-conditioning fitting
This worked estimate is for an R134a system. Check the vehicle's under-bonnet refrigerant label before selecting a service; R1234yf has a separate calculator option and price. Refrigerant should not simply disappear, so a good service also checks for leaks.
Calculate for my car → Free to use. No account needed.Published by David Burridge, ShiftyMechanics founder and editor. Source checked . Guide content updated . How estimates work.
2015 Toyota Camry · Australia
From $249 R134a service, up to 1,000 g
The refrigerant label and system type are confirmed, operating pressures and vent temperature are assessed, and an initial visual and electronic leak check is carried out.
Remaining refrigerant is recovered with approved equipment, the system is evacuated and tested for its ability to hold vacuum before the specified mass of refrigerant and oil is charged.
Cooling performance, pressures and compressor operation are rechecked. A regas is not appropriate where a significant leak or failed component remains unrepaired.
A symptom alone does not prove a part has failed. Before authorising work, ask what inspection or test led to the recommendation.
Compare like with like. A lower quote may simply cover less of the job.
These items are not automatically required, but they can change the bill when inspection shows they are needed.
atmechanical's advertised Perth/Mandurah mobile R134a service starts at A$249 for up to 1,000 g. Confirm the vehicle's actual refrigerant and required charge, service-area eligibility, GST and fees. Extra R134a is A$25 per 250 g; repairs, parts and in-depth leak diagnosis are extra. The blower must work. If a fault prevents regas, the inspection charge is A$119. This is a regional supplier example, not a guaranteed vehicle-specific quote or national market limit. Tax and fees: GST not stated on source page; confirm with supplier. Source checked 16 October 2026: https://www.atmechanical.com.au/aircon-price-perth
Yes. Most jobs show modelled parts, labour and rates separately. Published supplied-and-fitted examples include installation in the advertised price. They do not provide a separate parts/labour breakdown; confirm tax, fees and fitment with the supplier.
A useful written quote should identify the repair scope, the main parts being supplied, the expected labour and any likely additional work. For this job, common inclusions are recovery of existing refrigerant, vacuum and basic leak-hold test, specified refrigerant charge.
Choose your car and repair to review available price references, their scope and any remaining model assumptions.
Check the estimate